UK SIP manufacturer · Structural design · Panel supply

SIP packages manufactured and engineered in-house

A coordinated package of walls, floors, internal studwork and roofing elements.

From provisional drawings to a fully engineered package

From a general arrangement to a delivered shell

  1. Design & finish
  2. Project location
  3. Engineering and costing
  4. Manufacture
  5. Delivery

We design the building structure with our SIPs, resolving openings, connections, floor and roof interfaces prior to quotation. This minimises unknowns and allows accurate project pricing.

We can deliver our package as individual elements for assembly on site, or pre-assemble it in our factory into large panel format, with all associated elements incorporated.

Etopia supply

What we supply

We manufacture and prepare the principal structural elements in-house. The package is coordinated around the engineered building design, with the included elements and level of factory assembly defined in your quotation.

01 / SIP PANELS

Manufactured, cut and prepared

We place boards into moulds and inject foam to manufacture our SIPs. The panels are then cut to the required size and prepared to accept the splines and timber elements specified in the design.

These prepared SIPs are either sent to site as part of a kit for site assembly, or pre-assembled into large panel format within our factory.

02 / TIMBER COMPONENTS

Reveals, splines and head binders

The timber elements are manufactured in our sawmill. These include, but are not limited to, door and window reveals and the internal skeleton of plywood splines.

In large panel format, these elements are pre-assembled and supplied with the glulam ring beam pre-attached.

03 / STRUCTURAL STABILITY

Ring beams, sway frames and steelwork

A continuous glulam ring beam at each floor zone ties the building together and minimises movement.

We incorporate steelwork where appropriate, along with sway frames to accommodate large openings.

04 / FLOORS

Site-assembled or factory-made

Floors can be provided as single elements for assembly on site, or as pre-manufactured floor cassettes, depending on the building design, site access, available lifting and installation sequence.

05 / INTERNAL WALLS

Load-bearing and non-load-bearing studwork

We build our own stud walls, whether load-bearing or non-load-bearing. These are coordinated with the overall building layout and structural design.

06 / ROOF PACKAGE

Roofing timber

Our supply includes the roofing timber, with all types of roofs catered for.

Additional scope

Large panel format (LPF) can be delivered pre-fenestrated and pre-battened, ready to take your interior finishes, with external battening or carrier boards for your chosen external finish.

Manufacture around the delivery plan

Small panels or large panel format

Small panels and prepared components support sites where access limits the size of elements that can be delivered or moved into position.

Large panel format brings more assembly into the factory, reducing site joints and the number of lifts. Depending on the specification, panels can be internally battened and pre-fenestrated, with suitable finish-support details prepared before delivery.

The right format depends on site access, lifting capacity available, and installation sequencing.

Large panel format EI. SIP wall sections on transport stillages
Large panel format moves more preparation into the factory.

Two SIP systems we manufacture

Choose the system around the project

EI. SIP

OSB-faced insulated panels with an integral plywood frame. The internal skeleton carries loads through the structure while the connection design helps limit thermal bridging at panel joints.

Engineered glulam ring beams tie the structure together at floor levels. Glulam is structural timber made from layers bonded together to form an engineered beam.

Explore EI. SIP technical information →

4Wall

Our original system combines cement-bonded particle board facings, insulation and an integrated steel frame. This gives superior mechanical properties and does not require membranes.

We assess the design and recommend the appropriate system for your application.

See our walling systems →

Three reasons to consider SIPs

Speed, thermal performance and structural stability

01 / PROGRAMME

Move more work into the factory

With small panel format and all components pre-cut, assembly on site is rapid. With large panel format, a full weathertight shell can be installed in days, especially when panels are delivered pre-fenestrated.

02 / FABRIC

High insulation within the wall

With our continuously insulated core and novel jointing methods, the structural shell is airtight without membranes.

Whole-building energy performance also depends on the roof, floors, glazing, ventilation, services and workmanship.

03 / STRUCTURE

Stability designed into the system

The structure combines the SIP panels, glulam ring beam and interconnecting plywood skeleton with timber point-load supports and head binders. The entire system is engineered to work together to give maximum stability and stiffness.

Where openings or spans require additional support, glulam beams or steelwork are incorporated.

Method comparisons for thermal performance

Thin wall build-ups with exceptional performance

The example below illustrates how a specified SIP wall can achieve a low U-value within a slim finished build-up. The lower the U-value, the higher the thermal performance.

Specified wall exampleU-valueFinished thickness
Brick, 150 mm mineral wool, aircrete block and plasterboard on dabs0.18 W/m²K380 mm
Brick, 210 mm mineral wool, aircrete block and plasterboard on dabs0.13 W/m²K440 mm
Etopia Extend specified EI. SIP wall with a printed slip finish0.13 W/m²K266 mm

Technical and Downloads

Masonry examples: Knauf DriTherm Cavity Slab 32, BBA certificate 95/3212, Table 7. Thickness totals use 102.5 mm brick, 100 mm block, 12.5 mm plasterboard and 15 mm behind plasterboard, plus the stated insulation. Etopia figures and complete build-up are reproduced from the Etopia Extend technical page. These are specified examples, not universal dimensions for either construction method.

Questions about SIP manufacture and supply

Do you manufacture the panels yourselves?

Yes. Etopia manufactures its own SIP systems and principal structural elements in-house at Butterleigh, Devon. We coordinate the engineering and manufacturing information for the package we supply.

Can you work with our architect’s design?

Yes. Send us the current plans, elevations, site location and intended programme. We can assess how the design can be developed into an engineered SIP structure and identify the information needed for a quotation.

Does a panel supply package include installation?

Installation is defined in the agreed scope. We can discuss supply for your delivery team or a structural shell package with installation. The quotation sets out the responsibilities and interfaces.

How do you confirm structural and thermal performance?

Structural design is assessed for the building and its site conditions. Thermal performance is assessed for the specified wall build-up and junctions. The technical documents explain the system evidence and applicable conditions.

Start with your project

Present us with your design and we will provide a costed package

Please provide us with details of your project, its location, expected delivery dates, scope of delivery, delivery constraints and any further information you have. We can then establish a route to delivery.

CONTACT US
OUR ACCREDITATIONS X CLOSE